Hydrostatic pressure could potentially cleaning technologies for the removal of pesticides residue from fruit and vegetables. This method accompanied by no visual changes (color, size and shape) in appearance. Also, no toxic intermediates were identified in the extracts.
High quality video system without spatial resolution loss is possible by using the sequential color method which includes RGB planes sequentially. These patents are an inter-picture predictive coding, a motion estimation and a picture conversion method to realize this.
This new technology offers a manufacturing method of the highly-concentrated nanobubble ozone water. An ozone gasification area can be connected to the ozone gas dissolution area making concentrated ozone gas dissolved in pure water by applying a supersonic wave. The ozone density is reduced only to half after nine hours.
This new technolgy offers the manufacturing method of a low-cost aluminum nitride inclusion. It supplies nitrogen gas to molten aluminum under nitrogen atmosphere and produes aluminum powder having a thin oxidation film on its surface.
Each of permanent magnets (PMs) building a Halbach array has a square cross-section parallel to the magnetized direction. The PMs are set in line so that the magnetized directions are rotating each other by 90 degrees. The field magnets of dual Halbach arrays with the air gap between the arrays 1.2 through 1.5 times as long as the one side of the cross-section gives a maximum number of interlinkage fluxes to coreless coils of the armature.
The microbial lectin actionohivin exhibits selective and strong anti-HIV/HCV activities by binding to a glycoprotein having many high-mannose type glycans. The dimeric derivatives of AH have more strong activities than AH. AH does not show any adverse effects such as cytotoxicity and mitogenic and cytokine/chemokine-inducible activities.
We fabricated a novel device assembled by coupling a transparent organic light- emitting diode (TOLED) and a glare-tunable transparent electrochemical device. This device could be operated in six different states, namely, (1) transparent, (2) mirror, (3) black, (4) dual emission, (5) single-side emission with mirror, and (6) single-side emission with black. Switching between each of these states could be tuned by varying/selecting the applied DC bias voltage.
This method has an advantage that the defect of each cell is detected by measuring the current of the PV module. By the application of this method, the PV modules with hotspot can be prospectively excluded in the PV power generation system.